Mast Climbing Work Platform (MCWP) course for:
- Mobile operators
- Demonstrators
- Installers
- Advanced installers
- Instructors
- Operators
Other training courses:
- The safe Inspection, recording, donning and use of harnesses
Course objectives: To enable delegates to understand the safety requirements for the equipment and to instruct the trainee to safely operate various types of Mast Climbing Work Platforms
Who will benefit: Everyone who uses or intend to use Mast Climbing Work Platforms (MCWP), and those responsible for the management of the equipment whilst on site
Course content
- Awareness of safety responsibilities
- Accident prevention
- Pre-use, daily and weekly checks
- PPE requirements
- Features, capabilities and limitations of the machine category
- Safe operation/installation procedure and manoeuvring of the machine category
- Test paper
No of delegates per session:
Demonstrator – max 6
Operator – max 8
Mobile Operator – max 6
Training methods: Lectures, video, demonstration, practical use
Training modules: Various, dependant on the course, 1-27 in total
Assessment: Will be both theoretical and practical test, with a pass requiring an achievement of at least 80% in each assessment. The assessments from each module will be reviewed with the candidate at the end of training to allow feedback and comments
Objectives:
At the end of the course the candidate will be:
- Aware of the relevant local Health and Safety regulations, standards, codes and guidance for the design, supply, use and management of MCWPs
- Capable of the safe operation of a MCWP
- Aware of, and able to use, the correct emergency procedures and systems of a MCWP to enable its safe operation in an emergency
- Capable of carrying out pre-use/daily checks
- Capable of carrying out weekly inspections
- Capable of assessing the suitability of ground conditions and correctly setting up the MCWP base
Certification: Successful delegates will receive a Powered Access Licence card with certificate (PAL) and a safety guide and log book relating to the specific IPAF course that the delegates trained on
PPE requirement: Delegates should bring the following PPE with them as standard, safety helmet, boots, gloves and eye protection, and overalls if preferred
For more information on this or other courses please contact us.
Mast Climbing Work Platform (MCWP) course for:
- Mobile operators
- Demonstrators
- Installers
- Advanced installers
- Instructors
- Operators
Other training courses:
- The safe Inspection, recording, donning and use of harnesses
Course objectives: To enable delegates to understand the safety requirements for the equipment and to instruct the trainee to safely operate various types of Mast Climbing Work Platforms
Who will benefit: Everyone who uses or intend to use Mast Climbing Work Platforms (MCWP), and those responsible for the management of the equipment whilst on site
Course content
- Awareness of safety responsibilities
- Accident prevention
- Pre-use, daily and weekly checks
- PPE requirements
- Features, capabilities and limitations of the machine category
- Safe operation/installation procedure and manoeuvring of the machine category
- Test paper
No of delegates per session:
Demonstrator – max 6
Operator – max 8
Mobile Operator – max 6
Training methods: Lectures, video, demonstration, practical use
Training modules: Various, dependant on the course, 1-27 in total
Assessment: Will be both theoretical and practical test, with a pass requiring an achievement of at least 80% in each assessment. The assessments from each module will be reviewed with the candidate at the end of training to allow feedback and comments
Objectives:
At the end of the course the candidate will be:
- Aware of the relevant local Health and Safety regulations, standards, codes and guidance for the design, supply, use and management of MCWPs
- Capable of the safe operation of a MCWP
- Aware of, and able to use, the correct emergency procedures and systems of a MCWP to enable its safe operation in an emergency
- Capable of carrying out pre-use/daily checks
- Capable of carrying out weekly inspections
- Capable of assessing the suitability of ground conditions and correctly setting up the MCWP base
Certification: Successful delegates will receive a Powered Access Licence card with certificate (PAL) and a safety guide and log book relating to the specific IPAF course that the delegates trained on
PPE requirement: Delegates should bring the following PPE with them as standard, safety helmet, boots, gloves and eye protection, and overalls if preferred
For more information on this or other courses please contact us.
